|
|
Manual
Chop Saw
MCS-140,
MCS-180,
MCS-2000
|
MCS-140
Manual
Chop Saw
|
|
Specifications
|
| |
MCS-140
|
MCS-180
|
| MATERIAL
SIZE |
3 ¼"
x 6 ½", 2" x 8", 1"
x 8 ½"
|
5 ½"x
6 ½", 5" x 8"
|
| MOTOR |
5 HP
|
7½ HP
|
| SAW
BLADES |
14" - 30
Tooth or Nail Resistant
|
18" - 360
Tooth or Nail Resistant
|
| DIMENSIONS
& WEIGHT |
76" w X
36" d 36" high 1060 lbs
|
76" w X
36" d 36" high 1060 lbs
|
| AIR
PRESSURE |
Not required
|
-
|
Options
|
| |
MCS-140
|
MCS-180
|
| FEEDING |
Idler feed rolls
on table
|
| MOTOR |
Phase and Voltage
to suit individual
|
| |
Left or right
handed
|
|
|
Operation
|
| To
operate this machine,set stop to the desired board length.
Placematerial to cut against the stop. Holding the material
with left hand, grasp the carriage handle with right and
pull down bringing the blade through the material. Raise
right hand back up to exit blade from material. Remove cut
material. |
|
|
|
Standard
Features
|
| -Machine
will cut as fast as it can be fed. |
| -Nylon
block seals around blade which helps prevent jamming.
(MCS-140 only) |
| -Cutter
guard floats with saw blade, rests on material while
cutting enclosing blade area. |
| -All
machine parts are readily accessible for easy maintenance. |
|
|
|
MCS-2000
Super Chop Saw |
|
Specifications
|
| |
MCS-2000
|
| MATERIAL
SIZE |
2" x 12"4"
x 11 1/2"6" x 9 1/2"
|
| MOTOR |
7 1/2 HP motor
and starter.
|
| SAW
BLADES |
20" diam.
60 tooth 1" bore
|
| DIMENSIONS
& WEIGHT |
40" deep x
48" wide BASEup to 20' wide w/ conveyors1200
lbs.
|
| AIR
PRESSURE |
None
|
-
|
Options
|
| |
MCS-2000
|
| CUTTING |
10 HP motor
|
| MOTOR |
Larger blade
to process 2 x 14" to 7" x 10"
material
|
|
|
Operation
|
| Material
is moved left to right by operator on roller conveyor .
Stops are to right side of blade. Bring material up to stop.
Hold board againist back fence with left hand.Pull down
on saw carriage handle with right hand until cut is complete.
Raise carriage out of material, push cut materialout of
way and push material to cut against |
|
|
|
Standard
Features
|
| -
Cuts as fast as can be fed |
| -
Heavy duty saw guard floats with blade, rests on
material while cutting, enclosing blade area. |
| -
Heavy
duty 3" tube frame , standardized bearings,
belts, motors, etc. Easy to maintain & and operate. |
|
